SQ-Series Auger Bits

The SQ-Series replaces the DFB-Series with the same reliable and affordable features, like a reinforced fabricated boring head and double-wrapped flighting. The SQ-Series has been improved to incorporate a square-drive center point for improved point-holding capabilities and interchangeability with other auger brands. In many conditions, the SQ-Series is comparable to our competitor's more expensive cast-head augers. They are an exceptional value.

Standard SQ-Series auger bits are approximately 50 inches in overall length. Diameters range from 6 inches to 36 inches.

TSQ-Series Augers Bits for Trees and Shrubs

TSQ-Series augers are designed with smaller diameter auger flighting at the bottom, which leaves a space for root balls, fertilizer, or mulch. 

Augers are approximately 42 inches in overall length. Diameters range from 18 inches to 36 inches

*TS-30H model shown. The TSQ is the same, except it has the improved point as described in the SQ description.

LP-Series Auger Bits

With heat-treated alloy steel boring heads and a wide variety of teeth and points available, the LP-Series is designed for more difficult digging. LP-Series augers are recommended for use on the SK150, SK200, SK225, and SK250 auger drive units, the E-Series auger drive units when used in tougher conditions, and certain backhoe loader applications. 

The standard LP-Series auger bits are approximately 50 inches in overall length. Diameters range from 6 inches to 36 inches. 

LX-Series Auger Bits

These are the strongest and most durable auger bits we have ever produced. Recommended for use with the SK450 auger drive units and other drive units when the applications are unusually tough or abrasive. We feel you will not find a better auger bit anywhere.

LX-Series bits feature a heavy-wall center shaft with the strongest cast-alloy boring heads and 3/8-inch double-wrap flighting. Even the tooth holders are removable and can be easily replaced in the event they do become worn. A wide variety of large teeth and center points are available to adapt your auger to almost any augering conditions.

Because of the tough conditions these auger bits are used in, they come standard with a heat-treated 2-inch hex hub. (2 1/2-inch hex hub is available.) LX-Series auger bits are approximately 50 inches  in overall length. Diameters range from 9 inches to 48 inches.

RSQ-Series Auger Bits

Specialty bits designed for tearing and gouging coral, shale, and other types of fracturable materials. These come with conical carbide teeth and a choice of a dirt, stepped carbide, or conical carbide point.

RSQ models have a dirt point. RSQ-SP models have a stepped carbide point; and the RSQ-CP models have the conical carbide point that is shown in the picture to the left.

Please visit the Lowe web site at http://www.loweman.com/a-bits-rsq.html to see more information on the auger bit selection.

We do not list our e-mail address because we don't want spam-spiders grabbing it. Please use our Contact Form for any enquiries